skip to main text

Setting Items for Copying

The following screen is displayed by pressing the right Function button on the Copy standby screen.

Use the UPDOWN button to change the setting item and use the LEFTRIGHT button to change the setting.

figure: LCD

Note

  • Some settings cannot be specified in combination with the setting of other setting item or the copy menu. If the setting which cannot be specified in combination is selected, Error details appears on the LCD and appears at the setting item. In this case, press the left Function button to check the message and change the setting.
  • The settings of the page size, media type, etc. are retained even if the printer is turned off.
  • When copying starts in the copy menu that is not available with the specified setting, The specified function is not available with current settings. is displayed on the LCD. Change the setting, following the on-screen instructions.
  1. Magnif. (Magnification)

    Specify the reduction/enlargement method.

  2. Intensity

    Specify the intensity. When Auto is selected, the intensity is adjusted automatically according to the originals loaded on the platen glass. Auto is displayed on the Copy standby screen.

    figure: LCD

    Note

    • When Auto is selected, load the original on the platen glass. You cannot use the ADF.
  3. Page size

    Select the page size of the loaded paper.

    Note

    • Only the page sizes selectable from the operation panel are displayed.
  4. Type (Media type)

    Select the media type of the loaded paper.

    Note

    • Only the media types selectable from the operation panel are displayed.
  5. Print qlty (Print quality)

    Adjust print quality according to the original.

    Important

    • If you use Standard with Type set to Plain paper and the quality is not as good as expected, select High for Print qlty and try copying again.
    • Select High for Print qlty to copy in grayscale. Grayscale renders tones in a range of grays instead of black or white.
  6. Layout

    Select the layout.

  7. 2-sidedPrintSetting

    Select whether to perform two-sided copying.

  8. Collate

    Select whether to obtain sorted printouts when making multiple copies of a multi-paged original.

  9. Frame erase copy

    When copying thick originals such as books, you can make a copy without black margins around the image and gutter shadows.